Our services
Every floor starts the same way: a moisture test, diamond grinding and crack repair. What changes is the system that goes on top.
Epoxy base coats on ground, moisture-tested concrete, finished with a UV-stable clear coat that holds up to Florida sun.
How it’s done →Vinyl chips broadcast to full coverage over a pigmented base, scraped, then sealed under a UV-stable clear coat with adjustable grip.
How it’s done →Aliphatic polyaspartic coatings that hold their color in sun and cure fast, scheduled around Tampa humidity and dew point.
How it’s done →Layered metallic epoxy for garages, showrooms and indoor rooms, sampled first because no two floors come out the same.
How it’s done →Diamond grinding to the surface profile the coating calls for, plus crack, spall and joint repair so the slab is sound first.
How it’s done →Failed or peeling coatings diagnosed, ground off to sound concrete, or scuff-sanded and recoated when the bond is still good.
How it’s done →Outdoor coatings for lanais, patios and pool decks, built for UV, heat, moisture from below and wet bare feet.
How it’s done →Resinous floors for shops, warehouses and showrooms, sized to forklift traffic, checked against chemical charts and slip targets.
How it’s done →Free estimate
Tell us about the garage and the finish you have in mind. We’ll call to book a visit where the slab is measured and moisture-tested and you see real chip samples.
We’ll call to set up your estimate. To talk sooner, call (813) 513-1905
Something went wrong sending your request. Please call (813) 513-1905 and we’ll take the details over the phone. Your answers are still filled in below if you’d rather try again.